1. Product introduction:
The ZJSC-YS140PLUS multi-purpose permeable trace evidence fingerprint smoke display cabinet has the same function as the ZJSC-YS200PLUS multi-purpose permeable trace evidence fingerprint smoke display cabinet, with a relatively small size and content; it is mainly used for permeability testing materials ( Such as: the appearance of latent sweat fingerprints on paper materials.
 
2. Technical specifications
1. Using self-designed embedded microprocessor control circuit and PID computer control
2. Proportional integral technology to realize the linkage control of temperature and humidity in the cabinet;
3. Use imported advanced self-calibration integrated temperature and humidity solid sensor to realize accurate measurement of temperature and humidity in the cabinet;
4. Using 7-inch color LCD touch screen full Chinese operating system to achieve multiple target touch operation completion and real-time display of various data; display size 140x105mm;
5. Smoke display mode: automatic/manual automatic smoke display: nindione, ninhydrin, DFO and the preset fourth reagent smoke display selection; at the same time, each reagent has 3 smoke display methods to choose; manual smoke display: used Any experimental application of fumigation reagent;
6. There is smoke display parameter setting and modification mode;
7. With automatic display timing function and audio prompt function;
8. Temperature and humidity control range: temperature normal temperature +5 ～132℃±0.5℃ humidity 10 ～99%RH ±1.5
9. Three-layer hollow heat-reflective film glass observation window to reduce internal and external heat exchange, and there is no water mist and water droplets on the inner surface of the glass; the size of the observation window: 500×450 mm;
10. It adopts a concealed internal air-following design, with soft air volume, stable material inspection, uniform temperature and humidity in the cabinet, and the observation window is not easy to fog;
11. Equipped with a safety relief port to prevent danger caused by excessive internal pressure under working conditions;
12. Adopt high-quality brushed stainless steel liner, two-layer movable stainless steel partition and top stainless steel movable crossbar;
13. Lighting: 2 pieces of 10W/24V-, upper and lower lighting, with a 10-second delay of lighting and automatic shutdown function;
14. Built-in water storage tank and water supply system, without external water pipes, high and low water level warning control, touch screen to operate the electric pump to fill water, the full water level will automatically stop, and there are overflow and discharge ports;
15. There is a hidden condensate collection container box at the bottom of the cabinet, which is convenient for cleaning;
16. Reasonable power supply requirements, total power <2200W, power supply: 220V/50HZ/10A;
17. Dimensions: height 1135×width 660×thickness 635mm; working size: height 600×width 550×thickness 430mm (140 liters)